- It is a cylinder type tube which is produced with a powerful special P.V.C coated fabric, which is strong against friction, varying climates and temperatures.
- It is made from a special waterproofed fabric, which is strong under stress.
- A large tent is constructed easily and quickly by inflation. It is also easy to carry and move.
- It is easy to use as a temporary command post in an emergency situation and is suitable as a rescue centre in emergency situation.
- As it is portable it can be used in various situations, for example, in an exhibition center (indoors or outdoors) or as a temporary warehouse/storage facility.
| Model No | SIZE(WxLxH) |
|---|---|
| GSC3060 | 300X600X210 |
| GSC4560 | 450X600X250 |
| GSC4070 | 400X700X260 |
| GSC5040 | 500X400X230 |
| GSC5672 | 560X720X270 |
| GSC6012 | 600X720X300 |
| GSC6065 | 600X650X300 |
| GSC8560 | 850x600x300 |
Multi purpose, rapid response shelters can be used for:
- Storage Areas
- Vehicle Maintenance
- Field Hospital
- Portable Morgue
- Casualty Holding Area
- Forward Advance Post
- Command Centres
- Crime Scene Preservation
- Rescue Headquarter in Emergency
- Temporary Outdoor Warehouse
- Movable Outdoor Fair & Outdoor Events
- Temporary Outdoor Lodging
- Air inflated Solid construction with ability to inflate in 5min or less Purpose to serve as a shelter in emergency situation.
- The tent could be inflated by air cylinder or air compressor
- Inflating time is not more than 5minutes or less
- The tubular system of the tents has no metal
- The tents can work in temperature between -30℃ to +70℃ degree
- Operating pressure 20%~30%(0.02~0.03bar)
- The tents should be provided with pressure valve for anti over inflation with Automatic Air Adjuster
- The carry-bag of the tent should be waterproof
- The tents should be provided with maintenance (repair) kit
- The tents should be provided two windows
- The tens should be provided with two doors (entrance or exit)
- The tents should be provided with windows (outlets) for hot and cold at least two windows as ventilation
- The tents should be provided with belt-hangers for lighter cable
- The tents should be able to be connected with each other
- The material is 1000 denier polyester coated with plastomer on the both sides
- Ground Floor should be anti-skid surface
- Pegs/Rods Repair kit. Carry bag and hammer
- Can be carried by 2-8 persons, dependent on size of shelters
- Can be anchored on hard or soft standing
- Supplied to army, navy, air forces and emergency services worldwide
- A wide range of size available
- Shelters can be linked together
- HAND PUMP & AIR BLOWER WITH HOSE
- STEEL PEGS / PLASTIC PEGS
- 30MTR CABLE REEL WITH 2PCS EACH PLUG / SOCKET
- HYDRAULIC DRILLING MACHINE
- 6.8LTR FIBER CARBON CYLINDER WITH GAUGE VALVE, EU VALVE & HOSE(300 bar)
- HAMMER 1KG & 2KG(TOTAL:2PCS)
- GROUND SHEET
- REPAIR KIT
-
-
＊THE FLUORESCENT LAMP ON THE TOP
There are 2~3lights on the top made by belts in the inside ceiling with a high-strength adhesive
-
-
＊THE ELECTRIC CABLE HANGER
There are 4 electric cable hangers made by belts in the inside ceiling with a high-strength adhesive
-
-
＊THE POLYESTER ROPE FOR MAINTAINING
Air Tent for maintaining against the wind, 10mtr and 5mtr polyester rope have draw on the top
-
-
＊THE AIR VENTILATION DOOR
Every Air Tent has the air ventilator Doors in the top of the entrance of the both side
-
-
＊AIR INFLATION, DEFLATION, AIR ADJUSTER, PRESSURE GAUGE & AIR BLOWER VALVES
There are 2 Air inflation valves, 2 Air deflation valves, 2 Air adjusters, 2 pressure gauges and 2 Air Blower Valves
It should be required when Air Inflating, 2 cylinder of 150bar and 1 cylinder of 300bar has to be air-filled
-
-
＊THE LINKED PASSAGE
Even different dimension of Air Tent, it can be connected each other through the connected passage
After linked each other by ZIPPER
Customization is available for all products
